Toilet Repair in San Antonio, TX
We repair running toilets, weak flushes, and water leaks at the base.
Plunger use is the right first step when a bowl will not clear, but it cannot stop a worn flapper, a failing fill valve, or a loose tank bolt. We recommend trying a plunger because it can clear a simple blockage in the trapway without removing the toilet or opening the tank.
We treat continued running, water at the base, or a bowl that may overflow as work that should not wait. A toilet that keeps cycling can waste water through the fill valve, while water beneath the bowl can soak flooring, loosen a wax ring, and reach the subfloor.
Running water and weak flushes
Customers commonly report a toilet that keeps running after a flush, a bowl that rises or clears slowly, a handle that does nothing, or water on the floor by the base. Inside the tank, a running sound may come from a leaking flapper, a fill valve that will not shut off, or a damaged flush-valve seat.
Water around the base may come from condensation, the supply connection, tank-to-bowl bolts, or the wax ring below the bowl. These complaints need different parts and different work, and we cannot determine the scope from the same symptom without checking the tank, bowl, and connections.
Tank and bowl inspection
We start by locating the fault in the tank, bowl, base seal, or water supply connection before replacing a part. We check the flapper seal, fill-valve shutoff, trip lever, overflow tube, water level, tank bolts, supply line, and shutoff valve; we also measure the flush-valve opening, which is commonly 2 or 3 inches.
Most flappers, fill valves, trip levers, supply lines, and tank bolts can be replaced during the same visit when matching parts are available. A standard tank check commonly takes 15 to 30 minutes, while bowl removal for a wax ring, a seized shutoff valve, or a nonstandard part may require a return visit or ordered material.
Shutoff valves and tank parts
Shutoff valve condition and tank hardware determine how far a toilet repair extends. A valve that will not turn, a corroded supply nut, or bolts fused to the tank can add work before we can safely replace the failed part.
Access also changes the scope when the toilet sits close to a wall, has a concealed supply connection, or needs bowl removal to reach the wax ring. Older fixtures may use discontinued flappers, specialty flush valves, or unusual bolt spacing, and a part that must be ordered or approved by a property manager cannot be completed until it is available.
Tank model and bathroom
Tank model numbers and the bathroom location help us bring the right flapper, fill valve, bolts, or supply line. The model is often printed inside the tank near the water line or on the underside of the tank lid, and the make may be marked on the bowl or lid.
Before calling, let us know which toilet is affected, whether water is running now, whether the bowl or base is leaking, and how easily we can reach the shutoff valve behind the fixture. Call Plumbing Solutions San Antonio at (726) 227-4061 before a running tank keeps cycling water or a leak at the base reaches the flooring beneath the bowl.
Next: faucet repair, or back to the home page.